Our 18" Wall Mount Misting Fan is great for use in areas where space is an issue. The yoke style mounting bracket allows you to mount the fan to
the wall or ceiling and the bracket has a tilt angle adjustment to direct air flow. The fan motor is totally enclosed and offers 3 speed settings with the
highest setting moving up to 3125 CFM of air. UL Listed and meets OSHA requirements. Fan runs on 115 volts.
Attached to the front of the fan guard is one of our anodized aluminum mister heads that houses the misting nozzles. Low pressure misting fans
come with a garden hose swivel to attach to a garden hose and high pressure misting fans come with a quick connect fitting to attach the misting fan
directly to your misting pump. Both high and low pressure misting fans come with chemical and corrosion resistant plastic misting nozzles that will
outlast brass misting nozzles. Each misting nozzle has a built-in mesh screen filter to prevent nozzle clogging and damage. In-line filters can be
added below if you are operating the misting fan with poor quality water.
Important Note: For low pressure mist cooling applications we recommend ordering a misting fan with no more than 5 misting nozzles. If you are
using a low pressure misting fan for dust or odor control applications, then we recommend ordering a misting fan with 7 or 10 misting nozzles. In the
event the misting fan is putting out too much mist for your liking, you can always plug misting nozzles off by purchasing a set of plugs below.
18" Wall Mount Misting Fan
|
Low Pressure Priced From: $349.99 to $429.99
High Pressure Priced From: $379.99 to $429.99
FREE SHIPPING WITHIN THE USA!
Low pressure misting fans attach to a garden hose. High
pressure misting fans attach to a misting pump.
ORDER BELOW
Close-up of the aluminum misting head that is attached to the fan. 3 Nozzle misting head is shown
|
Misting Systems & Misting Fans
FREE SHIPPING WITHIN THE USA!
Residential, Commercial, and Industrial Misting Applications
Phone: 610-481-9696
|
Order Low Pressure 18" Misting Fan
|
Order High Pressure 18" Misting Fan
|
Brass Plugs- 10 Pack (to plug off misting nozzles)
If your misting fan is making too much mist for your liking, you can
always remove misting nozzles and plug them off with these brass
plugs. These brass plugs are sold in packs of 10 and are made from
solid brass.
Pack of 10 Brass Plugs- $20
Low Pressure In-Line Filter
If you have a high sediment content, debris, lime, or calcium in your water,
we highly recommend you install a low pressure inline filter to your misting
fan. The inline filter will filter all of the water as it enters your water mister
and catch most debris before it reaches the filters on your misting
nozzles. An inline filter is a wise way to protect your investment!
$30 (will be installed on your mister)
High Pressure In-Line Filter
If you have a high sediment content, debris, lime, or calcium in your water,
we highly recommend you install a high pressure inline filter to your misting
fan. The inline filter will filter all of the water as it enters your water mister
and catch most debris before it reaches the filters on your misting nozzles.
An inline filter is a wise way to protect your investment!
$30 (will be installed to your mister)
Aqua Misters PO Box 633 Orefield, PA 18069
Phone: 610-481-9696 Email: contact@aquamisters.com
A division of SnowStorm Snowmaking, LLC
Entire contents copyright 2007-2011. All rights reserved.
|